HOW IT WORKS

 

GG304 AND GG304LED -STEP STROBE

1. Slide GG304 or GG304LED into 2” Hitch Receiver on your vehicle.

2. Plug 7 Way male plug on your Back-up Buddy unit into 7 Way Female on your vehicle.

3. Utility Lights will automatically come on in reverse.

4. There are two switches on the back of your Back-up buddy unit. One switch is for the strobe light. Just turn on the switch and strobe light will stay on.

5. The second switch is for the utility light function. Just turn on the switch with your parking lights on and the utility lights will stay on. The utility lights can be moved up and down and in and out.

6. Your Back-up Buddy unit can be used as a step getting in an out of your truck.

**If you do not have a 7 way connector on your truck you can hardwire this unit. You must add notes to “seller” that you do not have a 7 way connector on your truck and need to hardwire this unit when you are processing your order on the website or you can call us and process order over the phone. We will make the appropriate changes to your unit so that it may be hardwired.

**Please see our “Wiring Instructions” page on our website for your particular models

GG305 AND GG305LED - STEP STOP/TAIL

1. Slide GG305 or GG305LED into 2” Hitch Receiver on your vehicle.

2. Plug 7 way male plug on your Back-up Buddy unit into the 7 way connector on your vehicle.

3. Utility lights will automatically come on in reverse.

4. The oval red light is a stop/tail light - light will be slightly on and when you hit brakes it will light up like a third brake light.

5. The switch on the back of your Back-up Buddy unit is for the utility light function. With your Parking lights on you just turn on the switch and your utility moved up and down and in and out.

6. Your Back-up Buddy unit can be used as a step to get in and out of your truck.

**If you do not have a 7 way connector on your truck you can hardwire this unit. You must add notes to “seller” that you do not have a 7 way connector on your truck and need to hardwire this unit when you are processing your order on the website or you can call us and process order over the phone. We will make the appropriate changes to your unit so that it may be hardwired.

**Please see our “Wiring Instructions” page on our website for your particular models

>GG307 and GG307LED - Ball Mount Slide On

1. Remove your Ball Mount Hitch from your 2” receiver on your truck.

2. Slide your Ball Mount Slide On over your ball mount hitch. Set screws are to be on the bottom of your ball mount hitch.

3. Tighten your set screws with supplied Allen wrench.

4. Put your ball mount hitch back in your 2” receiver on your truck and put your pin back in.

5. Plug the 7 way male plug on your Back-up buddy unit into the 7 way connector on your vehicle.

6. Utility lights will automatically come on in reverse.

7. Attached to the 7 way male plug that you plug into your truck is a 7 way female or 4 way flat or both. Those are for you to plug in your trailer lights. So you will have all trailer light functions.

8. There is a switch on your light (GG307) or there is a switch on the 7 way plug harness (GG307LED). These switches control the utility light function. with your parking lights on and the switch turned on these lights will stay on. The utility lights can be moved up and down and in and out.

**If you do not have a 7 way connector on your truck you can hardwire this unit. You must add notes to “seller” that you do not have a 7 way connector on your truck and need to hardwire this unit when you are processing your order on the website or you can call us and process order over the phone. We will make the appropriate changes to your unit so that it may be hardwired.

**Please see our “Wiring Instructions” page on our website for your particular models.

GG308 - ATV/UTV SLIDE ON

1. Remove you ball mount or hook hitch from your 2” receiver on your ATV/UTV
2. Slide your Back-up Buddy Slide On model over your hitch - set screws on top of hitch
3. Tighten Set screws
4. Replace hitch back into your 2” receiver on ATV/UTV
5. Wire your ATV/UTV with supplied harness - see ATV/UTV wiring instructions for model GG308 on our Wiring Instruction page.
6. Plug your Back-up Buddy unit into wiring harness.
7. Turn on switch and lights will stay on.

*All ATV/UTV models can also be used on your truck with the purchase of our “ATV to Truck Harness”. Makes your ATV/UTV Back-up Buddy 2 units in 1. Your truck will need to have a 2” hitch receiver and a 7 way connector. When using the ATV/UTV model on your truck - the model will have all of the same functions as model GG307

**If you do not have a 7 way connector on your truck you can hardwire this unit. You must add notes to “seller” that you do not have a 7 way connector on your truck and need to hardwire this unit when you are processing your order on the website or you can call us and process order over the phone. We will make the appropriate changes to your unit so that it may be hardwired.

**Please see our “Wiring Instructions” page on our website for model GG307, to hardwire model GG308 for use on your truck.

GG309 - ATV/UTV Strobe

1. Slide your ATV/UTV Strobe model into 2” receiver on you ATV/UTV.
2. Wire your ATV/UTV with supplied wiring harness - see ATV/UTV wiring instructions for model GG309 on our “Wiring Instructions” page on website
3. After wiring harness is installed you will have two switches - one will control your strobe light and the other will control the utility lights.

*All ATV/UTV models can also be used on your truck with the purchase of our “ATV to Truck Harness”. Makes your ATV/UTV Back-up Buddy 2 units in 1. Your truck will need to have a 2” hitch receiver and a 7 way connector. When using the ATV/UTV model on your truck - the model will have all of the same functions as model GG304

**If you do not have a 7 way connector on your truck you can hardwire this unit. You must add notes to “seller” that you do not have a 7 way connector on your truck and need to hardwire this unit when you are processing your order on the website or you can call us and process order over the phone. We will make the appropriate changes to your unit so that it may be hardwired.

**Please see our “Wiring Instructions” page on our website for model GG304 to hardwire model GG309 for use on your truck.


 



Back-up Buddy Inc. - PO Box 2302 - Plainville, MA 02762 - (888) 856-3723

Copyright Back-Up Buddy, Inc. Patent Pending All Rights Reserved

Website created by NHS Creative